Exit Delay Time Restart
This option restarts the exit delay timer if an entry/exit zone is tripped a second time before the end
of the exit delay. The exit delay timer can only be restarted once.
The Quick Exit feature
Use the Quick Exit feature if the system is already armed and you would like to leave without
disarming and rearming the system. Quick Exit uses the same hot keys as Quick arming, and it
provides you with a 2-minute exit delay to leave the premises without triggering an alarm. Once the
door you leave from closes, the quick exit timer will be canceled.
Exiting the premises using the Quick Exit feature
To exit a premises using the Quick Exit feature, complete the following steps:
1. If the system is Armed and the Armed light is on, choose one of the following options:
- Press and hold the Quick Exit key for 2 seconds.
- Press [*] [0].
2. Exit the premises before the Exit Delay timer expires.
Bypassing zones
WARNING: If a zone is not operating properly, contact the installer immediately.
Bypassing zones intentionally unprotects specified zones the next time your system is armed.
Depending on the type of keypad, bypassed zones will be identified differently. Using an HS2LCD
series keypad, bypassed zones are indicated on the LCD screen as shown in the following table.
Note: For UL listed installations, zones can only be bypassed manually.
Table 3: LCD Keypad Zone Indications
LCD Display Indication Description
Zone Label <> none Zone is ready for arming.
Zone Label <> O O Zone is currently open. You may be
unable to Arm the system.
Zone Label <> B B Zone is bypassed.
Bypassed zones:
• Must be configured before arming the system.
• Can be configured using a keypad.
• Allow for access to protected areas when the system is armed.
• Allow you to Arm the system if a zone is temporarily out of service.
• Reduce the level of security.
• Will not sound an alarm.
• Are automatically cancelled each time the system is disarmed.
• Can be programmed together within bypass groups. For more information see “Bypass
Groups”.
15PowerSeries Pro HS3032/HS3128/HS3248 User Manual
To Next Page
Loading...
