Configuring additional user options
You can also assign users the following additional options:
Table 6: User options
[1] Supervisor Code For more information see "Access Code Types".
[2] Duress Code For more information see "Access Code Types".
[3] Zone Bypass Grants the user the ability to bypass zones.
[7] Bell Squawk Use to generate a bell squawk when arming and disarming
the system.
Note: When using wireless keys to arm and disarm the
system there will be:
• one bell squawk for arming.
• two bell squawks for disarming.
• three squawk pairs when disarming with an alarm in
memory.
[8] One Time Use For more information see "Access Code Types".
To configure additional user options, complete the following steps:
1. On the keypad, press * 5.
2. Enter your access code.
3. Use the Arrow keys to navigate to the user, and press *.
4. Navigate to User Options and press *.
5. Navigate through the options, and press * to select the option you want. For more
information, see Table 6.
Accessing the user function menu
The PowerSeries Pro allows for a variety of user configurable functions as listed below:
Event Buffer AutoArm Time Late To Open Contrast Control User's Walk Test
Time and Date System Service/DLS Late To Open Time Buzzer Control AutoArm/Disarm
Voice Chime User Call-Up Brightness Control Voice Prompt
Note: You can modify user functions only when the system is disarmed.
To access the User Function menu, complete the following steps:
1. On the keypad, press * 6.
2. Enter your access code.
3. Press # to return to the ready state.
27PowerSeries Pro HS3032/HS3128/HS3248 User Manual
To Next Page
Loading...
