Action Press
Arming and Disarming
Away arm
for 2 seconds + [Access Code†]
Stay arm
for 2 seconds + [Access Code†]
Night Arm When Armed in stay mode [*][1] + [Access Code†]
Disarm [Access Code]
No-Entry Arming [*][9] + [Access Code†]
Quick arm When the system is disarmed, press * 0
Quick exit When the system is armed, press * 0
Cancel arm Sequence [Access Code]
Bypassing - All bypass commands begin with [*][1] + [Access Code†]
Bypass Individual Zones [3 Digit Zone #]
Bypass All Open Zones [9][9][8]
Recall Last Bypass [9][9][9]
Clear Bypass
[0][0][0] OR [Scroll] Bypass Options + [*] + Clear
Bypasses + [*]
Program Bypass Group
[3 digit zone #s] + [9][9][5] OR [3 digit zone #s] +
Bypass Options + [*] + Prg Bypass Group + [*]
Load Bypass Group
[9][9][1] or Bypass Options + [*] + [Scroll] Bypass
Group + [*]
Common Functions
Set Time and Date [*][6] [Master Code] + [0][1]
Turn Chime ON/OFF
[*][4] + [Access Code†] or
Change Brightness
[*][6] [Master Code] + [1][2] +
Change Contrast
[*][6] [Master Code] + [1][3] +
Buzzer Volume
[*][6] + [Master Code] + [1][4] +
Add/Delete User [*][5] + [Master Code] + [Access Code] + 1
Reset Smoke Detectors
OR [*][7][2]
View Troubles
[*][2] + [Access Code†] +
View Alarms
[*][3] + [Access Code†] +
Performing a system test [*][6] + [Master Code] + [0][4]
† If configured by the installer.
Safety instructions
Important: This equipment must be installed by a skilled person only. A skilled person is an
installer with appropriate technical training. The installer must be aware of potential hazards
during installation and measures available to minimize risks to the installer and other people.
There are no user serviceable parts in this equipment. All equipment must be serviced by a
skilled person.
PowerSeries Pro HS3032/HS3128/HS3248 User Manual8
To Next Page
Loading...
