Viewing the event buffer
The event buffer displays a list of the last 500 events on the HS3032, and the last 1000 events on the
HS3128/HS3248. You can only view the event buffer using an LCD keypad.
To view the event buffer, complete the following steps:
1. On the keypad, press * 6.
2. Enter your access code.
3. Use the Arrow keys to navigate to Event Buffer, and press *.
4. Use the Arrow keys to scroll through the events.
Setting the time and date
To set the time and date, complete the following steps:
1. On the keypad, press * 6.
2. Enter your access code.
3. Use the Arrow keys to navigate to Time and Date, and press *.
4. Use the number keys to set the date and time.
5. Press # to return to the ready state.
Configuring the auto arm and disarm feature
Note: The installer must configure this feature.
To configure the auto arm and disarm feature, complete the following steps:
1. On the keypad, press * 6.
2. Enter your access code.
3. Use the Arrow keys to navigate to Auto Arm/Disarm, and press *.
4. Press * to enable or disable the feature.
Setting the auto arm time
You can configure the system to auto arm at a specific time on each day of the week. If you do not
configure a specific time for a day of the week, they system does not arm automatically on that day.
Note: The installer must configure this feature.
To set the auto arm time, complete the following steps:
1. On the keypad, press * 6.
2. Enter your access code.
3. Use the Arrow keys to navigate to Auto Arm Time, and press *.
4. Navigate to a day of the week, and press *.
5. Use the number keys to set the time in a 24-hour format.
Note: If you set an invalid time, the keypad sounds an error tone.
6. Optional: To set the auto arm time for another day of the week, repeat Steps 4 to 5.
PowerSeries Pro HS3032/HS3128/HS3248 User Manual28
To Next Page
Loading...
