2. Use the Arrow keys to navigate to the output control option you want, and press *.
3. Enter your access code to activate the command output.
Configuring a command output to follow a schedule
To configure a command output to follow a schedule, complete the following steps:
1. On the keypad, press * 7.
2. Use the Arrow keys to navigate to the follow schedule option, and press *.
3. Enter your access code or present a proximity tag.
4. Navigate to the command output that you want, and press *.
Burglary verification
The PowerSeries Pro system includes cross zone and sequential detection features that require an
activation on two or more zones, within a given time period, to generate a confirmed alarm and
immediate police response.
Note: This feature must be enabled and configured by your installer.
Call waiting
The PowerSeries Pro system includes a programmable option for call waiting to prevent a call
waiting line from interfering with the alarm verification process. This option is disabled by default.
Note: This feature must be enabled and configured by your installer.
Fire alarm verification
Fire Alarm Verification is an available option for Fire zones. If configured, and the conditions
for alarm verification are met, the fire alarm sounds and an alarm transmission is sent to the
monitoring station.
Note: This feature must be enabled and configured by your installer.
System lockout due to invalid attempts
If too many invalid access codes are entered, your system can be configured to automatically
lockout input from all keypads, wireless keys and proximity tags for a programmed duration. If this
happens, wait the programmed duration then try again.
Note: This feature and lockout duration must be configured by your installer. Fire, Medical and
Panic keys are still active during a System Lockout.
Troubleshooting
Occasionally, you may have a problem with your Alarm Controller or telephone line. If this happens,
your Alarm Controller will identify the problem and display an error message. Refer to the provided
list when you see an error message on the display. If additional help is required, contact your
distributor for service.
Note: There are no parts replaceable by the end-user within this equipment, except for the
keypad batteries. Dispose of used batteries as per local rules and regulations.
PowerSeries Pro HS3032/HS3128/HS3248 User Manual36
To Next Page
Loading...
