Note: Proximity tags must be enrolled on the system (see "Enrolling and Deleting Proximity
Tags").
Managing Users
The maximum number of access codes are as follows:
• 72 for HS3032
• 1000 for HS3128
• 1000 for HS3248
Each user access code can be:
• Uniquely labeled.
• Assigned a proximity tag. In order to operate, proximity tags must be enrolled in the system.
• Assigned to only operate specific partitions. For more information on partitions see:
"Managing Partitions".
• Configured with additional attributes. For more information see: "Configuring additional User
Options".
Note: Your installer configures all access codes to be either 4, 6, or 8 digits.
Access code types
The alarm system provides the following user access code types:
Code Add user Delete user Arm Disarm Access codes User
functions
Installer
Master All All Yes Yes Yes Yes No
User No No Yes Yes No No No
Supervisor All but Master All but Master Yes Yes Yes Yes No
Duress No No Yes Yes No No No
One-time user No No Yes 1/day No No No
Installer and Master codes are system codes that can be changed but not deleted. The other codes
are user-defined and can be added or deleted as necessary. By default, access codes have the same
partition and attribute programming as the code used to program them.
When using 8-digit access codes, each user can have the following maximum number of unique
code variations:
• 1,388,888 for HS3032
• 100,000 for HS3128
• 100,000 for HS3248
The system accepts all codes.
23PowerSeries Pro HS3032/HS3128/HS3248 User Manual
To Next Page
Loading...
