3. Choose one of the following options:
- Use the Arrow keys to navigate to the user, and press * *.
- Enter the user number, and press **.
Note: A dash indicates that there is no user code that corresponds to the user number.
4. Enter a new four, six, or eight digit access code.
Note: If you enter a duplicate code, the system sounds an error tone.
When the system programs the new code, a P appears and the display reverts to the Access
Codes menu.
Enrolling a proximity tag
When you enroll or delete proximity tags for a user, there is a choice of options. For more
information see Using Proximity Tags.
To enroll a proximity tag, complete the following steps:
1. On the keypad, press * 5.
2. Enter your access code.
3. Use the Arrow keys to navigate to a user and press *.
4. Navigate to Prox Tag, and press *.
5. Present the proximity tag to the reader. If the tag enrolls successfully, the blue LED bar flashes,
and a T appears next to the user's name. For touchscreen keypads, the Home button flashes.
Note: If a tag is enrolled for another user, or if the tag is invalid, a message displays.
Deleting a proximity tag
To delete a proximity tag, complete the following steps:
1. On the keypad, press * 5.
2. Enter your access code.
3. Use the Arrow keys to navigate to a user and press *.
4. Navigate to Prox Tag, and press *.
5. Press * to delete the tag.
25PowerSeries Pro HS3032/HS3128/HS3248 User Manual
To Next Page
Loading...
