Table 8: Trouble conditions
Trouble Condition Trouble Level 1 Description Trouble Types Trouble Level 2 Notification Level 3
HSM2HOST 01 n/a
Keypad 02 Keypad 1-32
Zone Expander 04 Zone Expander 1-30
Power Supply 05 Power Supply 1-4
High-current
Output
06 Output terminal 1-4
Output Expander 08 Output module 1-16
Audio Module 09 n/a
I/O Module 10 Module 1-30
Bus Repeater 11 Repeater 1-16
Module Tampers 10 The system has
detected a tamper
condition with one
or more modules
on the system. Call
for service.
3A Power Supply 12 Power
Supply 1-4
Telephone line
monitoring
01 n/a
Failure to
communicate
02 Receiver 1-4
SIM Lock 03 n/a
Cellular 04 n/a
Ethernet 05 n/a
Receiver 06 Receiver 1-4
Supervision
Receiver
07 Receiver 1-4
Alt Comm Fault 09 n/a
Communications 11 The system
has detected a
communication
trouble. Call for
service.
Alt Comm FTC 10 Receiver 1-4
Zone 01 Zone label 001-248
Keypad 02 Keypad 1-32
Siren 03 Siren 1-16
Repeater 04 Repeater 1-8
Not Networked 12 The system has
detected a network
trouble condition
with one or more
modules on the
system.
If the trouble does
not restore within
20 minutes, call for
service.
User 05 Users 01-1000
Zone 01 Zone
Power Supply 05 Power Supply 1-8
High-current O/P 06 Module 1-4
System Area 07 n/a
8 I/O Module 10 Module 1-30
Bus Repeater 11 Repeater 1-8
3A Power Supply
Aux 1
12 Aux 1 Trouble
AUX Trouble 13 The system
has detected a
trouble on the AUX
terminal.
3A Power Supply
Aux 2
13 Aux 2 Trouble
Interactive zone
limit
01 n/aLimited Exceeded 14 The system detects
incompatibility
with third-party
firmware.
Interactive partition
limit
02 n/a
PowerSeries Pro HS3032/HS3128/HS3248 User Manual40
To Next Page
Loading...
