FORM 160.77-O2
ISSUE DATE: 11/15/2011
SECTION 3 - YKEP CONTROL PANEL OPERATION
JOHNSON CONTROLS
51
3
PROGRAMMABLE
Cal Min
Access Level Required: OPERATOR
This key allows the technician to enter the proximitor
probe minimum offset reference postion values from
a log sheet, although the values are usually auto-cal-
ibrated.
The value is the percent of the potentiometer full 0 to
10 VDC span that will be used as the operating range
0% indication.
Cal Max
Access Level Required: OPERATOR
This key allows the technician to define the proximitor
probe maximum offset reference postion.
The value is the percent of the potentiometer full 0 to
10 VDC span that will be used as the operating range
100% indication.
Primary Calibration
Access Level Required: OPERATOR
Start
This button activates a proximitor probe calibration
procedure to begin.
Cancel
This button cancels the request for a proximitor cali-
bration procedure.
Secondary Calibration
Access Level Required: OPERATOR
Start
This button activates a proximitor probe calibration
procedure to begin.
Cancel
This button cancels the request for a proximitor cali-
bration procedure.
NAVIGATION
Previous
Returns the display to the previous screen.
To Next Page
Loading...
