FORM 160.77-O2
ISSUE DATE: 11/15/2011
SECTION 3 - YKEP CONTROL PANEL OPERATION
JOHNSON CONTROLS
83
3
PROGRAMMABLE
Setpoint
Access Level Required: OPERATOR
Allows the operator to select Local or Remote Leaving
Chilled liquid Temperature Setpoint.
Start
Allows the operator to select a Local or Remote Start
command.
Remote Start
Allows the operator to select how the Remote Start
Command is communicated.
Local Chilled Setpoint
Allows the operator to program the Local Chilled
Setpoint.
Restart
Allows the operator to program the Chilled Liquid Re-
start temperature.
NAVIGATION
Previous
Returns the display to the previous screen
Logviewer
Causes an instant navigation to the Logviewer Screen.
Sales Order
Causes an instant navigation to the Sales Order Screen.
Communications
Causes an instant navigation to the Communication
Screen.