DP350 User's Manual
- 13 -
the select guide carefully. Such as, select “Local or Network Printer”, then click “next”.
3) A window of “Select the Printer port” pops up, select a port you want your printer to use. For
example, select “Create a new port”, select “Standard TCP/IP Port” in the port, click “next”.
4) A window of “Add standard TCP/IP Printer Port Wizard”, click “Next”.
5) A window of “Add Port” pops up, enter the IP address reported by the “Setting printer’s IP address”
in the “Printer Name or IP Address” column. Take IP address “192.168.0.240” for example. “Port
Name” is created automatically after finishing filling in IP address.
6) A window of “Additional Port Information Required” pops up, select “Custom” in the “Device Type”,
then click “Settings”.
To Next Page
Loading...
