JR Vibe 90SG - Page 59

59
E) Servo Reversing
PresstheUPkeytoselecttheREVERSINGfunction.Next,reversechannels1,2,3and4byselectingthechannelwith
theSELECTkey,andpressingtheINCREASEkeyasneededtochangefromNORMtoREV.
F) Travel Adjustment
PresstheUPkeytoselecttheTRAVELADJUSTfunction.SettheTravelAdjustvaluesasshownasinitialsettings,
whileusingthecontrolsticktoselectup/down,orleft/rightvaluestobeadjusted.Pleasenotethattherequired
travelvalueswillvarybasedonthetypeofservoselected.Usethegeartraveladjustvaluestosetthegovernor
settingtoadjusttheheadspeedoftheheliasdesired.
G) CCPM Settings
PresstheUPkeytoselecttheSWASHMIXfunction.Changethevalueoftheaileron,elevator,andpitchfunctions
fromthefactorydefaultsettingusingtheINCREASEkeyandselectingthechannelwiththeselectkeytothevalues
as shown.