4. Installation setting
JCX-161 BNWAS Installation Manual
88
7ZPNA4321
4.5 MAINTENANCE function
4.5.1 EXTERNAL INPUT function
This function is to display input conditions for the reset signals which are connected to the control
unit.
While pressing the reset button, "ON" is displayed on an applicable unit number (SW number).
Operating procedure
1) Display the maintenance menu by referring “4.1 Changing to maintenance mode”.
2) Select sequentially “MAINTENANCE” and “EXTERNAL INPUT” with , and then the input
conditions for the reset signals are displayed.
BNWAS EXTERNAL INPUT
RESET
SW1 OFF , SW2 OFF
SW3 OFF , SW4 OFF
SW5 OFF , SW6 OFF
SW7 OFF , SW8 OFF
SW9 OFF , SW10 OFF
■
[M]
To Next Page
Loading...
