4. Installation setting
JCX-161 BNWAS Installation Manual
84
7ZPNA4321
4.2 Setting BUZZER CH
This is to set to use (ON) / non-usage (OFF) information for the connection ports CH3 ~ CH8 of
buzzer units. The channel which does not connect a buzzer is set as OFF.
Operating procedure
1) Display the maintenance menu by referring “4.1 Changing to maintenance mode”.
2) Select “BUZZER CH” with , and then press . After that, the following screen is
displayed.
3) Select a setting channel with , and then press in order to become ON/OFF setting
condition.
4) Select ON/OFF with , and then press . After that, its channel is set.
5) Press in order to return to maintenance mode.
BNWAS BUZZER CH
CH3: ON
▼
CH4: ON
▼
CH5: ON
▼
CH6: ON
▼
CH7: ON
▼
CH8: ON
▼
■
[M]
To Next Page
Loading...
