JRC JCX-161 - Buzzer Unit (NVS-785); Installation; Flush Mounting Installation

2. Installation
JCX-161 BNWAS Installation Manual
28
7ZPNA4321
2.6 Buzzer unit (NVS-785)
2.6.1 Installation
When installing it in a console panel, cut out the panel surface in the shape as shown in the
following figure.
When installing it by flush mounting, remove a lower grommet.
Or when installing it on the wall, remove the bracket from the Unit.
2.6.2 Flush mounting installation
Attach by the panel cut of the following figure.