JRC JCX-161 - Chapter 6 After Service; Repair, Exchange, and Trouble Reporting

3. Wiring
JCX-161 BNWAS Installation Manual
53
7ZPNA4321
3.3.6 Reset button unit / motion Sensor / external navigation equipment connection
terminal block (CDJ-2486 TB3)
• Outline of terminal block
• Wiring table
Terminal No. Terminal name I/O Function Connected unit
1 RESET6 + O RESET6 power output +
2 RESET6 - - RESET6 power output -
3 RESET6 RS I RESET6 reset input
4 RESET6 VI O RESET6 visual alarm output
5 RESET6 BZ O RESET6 audible alarm output
Reset button unit
External navigation
equipment (*1)
6 RESET7 + O Motion sensor 1 power supply +
7 RESET7 - - Motion sensor 1 power supply -
8 RESET7 RS I Motion sensor 1 reset input
Motion sensor
9 RESET8 + O Motion sensor 2 power supply +
10 RESET8 - - Motion sensor 2 power supply -
11 RESET8 RS I Motion sensor 2 reset input
Motion sensor
12 RESET9 RS I
External navigation equipment 1
reset input
13 RESET9 G -
External navigation equipment 1
GND
External navigation
equipment
14 RESET10 RS I
External navigation equipment 2
reset input
15 RESET10 G -
External navigation equipment 2
GND
External navigation
equipment
*1. Connect with the "-" terminal and a "RS" terminal.
• Wiring method
Same as wiring method of Clause 3.3.4 CDJ-2486 TB1.
115
RESET6 RESET7 RESET8
RESET9
RESET10