2. Installation
JCX-161 BNWAS Installation Manual
27
7ZPNA4321
2.5 Reset button unit (Waterproof) (NCJ-896)
There is a gasket between the top cover and the case. Because the gasket is the consumables,
tighten the screw of the top cover after completing confirming the operation.
2.5.1 Installation outline
NCJ-896 can be installed on a wall only. The space shown in the figure below is required for
installation.
After cable connection, fasten a cable ground well for waterproofing.
2.5.2 Installation
Attach by the panel cut of the following figure.
4- 5.5 or M4
88
To Next Page
Loading...
