JRC JCX-161 - Software Update Procedure

4. Installation setting
JCX-161 BNWAS Installation Manual
96
7ZPNA4321
4.7.2 Software update procedure
1) Preparation
1.1) Prepare the followings:
- Personal Computer (PC)
OS: Windows XP, Windows Vista, or Windows 7
(The each OS is required corresponding to the Japanese version and the English version.)
Middleware library: .NET framework 3.5 is required.
COM port is required. When there is no COM port, prepare a USB serial conversion adapter.
- Power supply/data cable (CFQ-5953)
- One set of PC software (JrcUpdateTool.exe etc.) for the update
A distribution file "JrcUpdateTool_v030.zip" is extract.
Since the following file is included, it arranges to the same directory on a PC.
File name Contents
JrcUpdateTool.exe Executable file
JrcUpdateTool.exe.config Application setting file
jrcnet.csv JRC network definition file
lewnet.csv LWE network definition file
equipment.csv Equipment definition file
filter.csv Filter definition file
serial.csv Serial equipment definition file
Readme.txt Quick instruction document (English)
Readme_J.txt Japanese instruction document (for in- company use)
- Update file (xxxxxxx.img)
1.2) Copy one set of the PC software (JrcUpdateTool.exe etc.) for the update and the update file to
arbitrary folders of the PC.
1.3) Turn on the power supply of NWZ-4650. (Turn on the power supply of NCK-175.)
1.4) Confirm the current software version of NWZ-4650.
-> Refer to the "4.7.1 Updating" for the confirmation procedure of software version.
1.5) Turn off the power supply of NWZ-4650. (Turn off the power supply of NCK-175.)