JRC JCX-161 - Firmware Version and Serial Number Display Function

4. Installation setting
JCX-161 BNWAS Installation Manual
91
7ZPNA4321
4.5.4 Firmware version and serial number display function
This function is to display the firmware version, serial number and bar code number of the display
unit.
Moreover, about its serial number and bar code number, they can be rewritten from the display unit.
Also the firmware version, serial number and the bar code number held in the control unit itself can
be display. Moreover, about its serial number and bar code number, they can be rewritten.
Operating procedure
1) Display the maintenance menu by referring “4.1 Changing to maintenance mode”.
■ When firmware version, serial number and bar code number of the display unit are displayed:
2) Select sequentially “MAINTENANCE”, “SOFT VERSION”, and “DISPLAY VER” with .
■ When firmware version, serial number and bar code number of the control unit are displayed:
2) Select sequentially “MAINTENANCE”, “SOFT VERSION”, and “CONTROL UNIT VER” with .
BNWAS CONTROL VER
FIRMWARE VER:
R01.00
SERIAL NO:
ME14346
BARCODE NO:
00000000001
■ [M]
Software version
Serial numbe
r
Bar code numbe
r
BNWAS DISPLAY VER
FIRMWARE VER:
R01.00
SERIAL NO:
KF19372
BARCODE NO:
01234567890
■ [M]
Software version
Serial numbe
r
Bar code numbe
r