JRC JCX-161 - 4 Installation Setting

4. Installation setting
JCX-161 BNWAS Installation Manual
82
7ZPNA4321
4 Installation setting
After the completing the installation and the wiring for the JCX-161, set the details in maintenance
mode.
Implement the following operations according to the system specification of each vessel.
> Setting BUZZER CH (Clause 4.2)
> Setting NMEA COMM (Clause 4.3)
> Setting RMS OUTPUT (Clause 4.4)
> MAINTENANCE function (Clause 4.5)
- EXTERNAL INPUT function (Clause 4.5.1)
- INPUT DATA function (Clause 4.5.2)
- Self-diagnosis (DIAGNOSIS) function (Clause 4.5.3)
- Firmware version and serial number display function (Clause 4.5.4)
- Password reset function (Clause 4.5.5)
> MASTER RESET function (Clause 4.6)
> SOFT UPDATE function (Clause 4.7)