2. Installation
JCX-161 BNWAS Installation Manual
21
7ZPNA4321
2.3.2 Desktop installation
Install in the following procedure.
(1) Fix the desk rack at the required installation position by using screws (provided by the
shipyard).
(2) Insert the front panel into the main unit.
(3) Attach the rotational washer on the each side of the main unit.
(4) Attach the rotational washer on the each side of the desk rack.
(5) Assemble the main unit on the desk rack, insert the knob metal washer between the each side
of the desk rack and the each knob bolt, and fix the main unit by tightening the knob bolts.
(provided by the shipyard)
To Next Page
Loading...
