JRC JCX-161 - Setting of DIP Switch

3. Wiring
JCX-161 BNWAS Installation Manual
45
7ZPNA4321
3.3.2 Setting of DIP switch
󲨘󲨘󲨘󲨘󲨘󲨘󲨘󲨘󲨘Refer to the arrangement figure of terminal block (CDJ-2486).
󲨘󲨘󲨘󲨘󲨘󲨘󲨘󲨘󲨘The switch for debugging
󲨘󲨘󲨘󲨘󲨘󲨘󲨘󲨘󲨘At ordinary operation, set S1 and S2 as follows.
No other settings should be used.
1) DIP switch location (S1, S2)
2) DIP switch (S1, S2) function
1
ON OFF
2
3
4
S1
S2