4. Installation setting
JCX-161 BNWAS Installation Manual
92
7ZPNA4321
■ When serial number and bar code number of the display unit and the control unit are rewritten:
3) Select a rewriting item ("serial number" or " bar code number") with , and then press .
A character input screen is displayed, and then input a serial number and a bar code number,
respectively.
A serial number can be inputted to 7 characters.
Moreover, a bar code number can be inputted to 11 characters.
Refer to the [Character input method] of "4.3 Setting NMEA COMM" for the details of the
character input method.
To Next Page
Loading...
