4. Installation setting
JCX-161 BNWAS Installation Manual
98
7ZPNA4321
2) Performance of Update
2.1) Set NWZ-4650 into the standby state of software transfer.
① Press in order to indicate the main menu (normal mode).
② Press long and for more than 3 seconds.
③ So the screen is changed to the maintenance menu (maintenance mode).
When it changes to maintenance mode, the [M] icon is indicated under the screen.
④ Select " SOFT UPDATE " with .
⑤ Since the following pop-up is indicated, select "YES."
⑥ So the following pop-up is indicated, and it is set the standby state of software transfer.
UPDATING NOW
SOFTWARE
UPDATE
YES NO
The [M] icon is
displayed.
BNWAS EQUIPMENT
BUZZER CH
NMEA COMM
RMS OUTPUT
MAINTENANCE
MASTER RESET
SOFT UPDATE
■
[M]
To Next Page
Loading...
