4. Installation setting
JCX-161 BNWAS Installation Manual
104
7ZPNA4321
2.7) Perform the update.
① Click the [Update] button, and then the update processing starts.
During updating, the following is indicated on the screen in the display unit.
② When the update is completed normally, the following is indicated on the screen in the display
unit, and it automatically restarts.
③ When the update is completed, the progress bar may be indicated again, and the following
error pop-up may be indicated, but this update has been completed. Disregard this error, and
click the [OK] button.
R0030
Update now.
......
R0000
Update completed.
Please reset.
① Click
"Version: R00.00.000" and
"Information:J000,N000,C000"
are displayed always.
To Next Page
Loading...
