Attention in use
JCX-161 BNWAS Installation Manual
ii
7ZPNA4321
Warning Symbols
In this Installation Manual and on the product, we use various pictorial indications to
handle the product safely and correctly and to prevent you from harming yourself and
other people or damaging those properties beforehand.
Meanings of the indications are shown below. Understand the meanings of signs
before proceeding to read the main text.
Examples
Electrical Shock
marks indicate CAUTION (including DANGER and WARNING).
Detailed contents of CAUTION (“Electric Shock” in the example on left)
are shown in the mark.
Disassembly
Prohibited
marks indicate prohibition.
Detailed contents of prohibited actions (“Disassembling Prohibited” in
the example on left) are shown in the mark.
●marks indicate a specific action that must be followed or instruction.
Detailed contents of instructions (“Ensure the ground wire is connected
to a grounded terminal” in the example to the left.)
For Warning Label
The warning label is sticked on the top panel of the control unit (NCK-175). Do not remove,
damage, or modefy the waring label.
This indication is shown where any person is supposed to be in
danger of being killed or seriously injured if this indication is neglected
or equipment is not operated correctly.
WARNING
This indication is shown where any person is supposed to be injured
or any property damage is supposed to occur if this indication is
neglected or equipment is not operated correctly.
CAUTION
DANGER
This indication is shown where any person is supposed to be in danger of
being killed or seriously injured if this indication is neglected or equipment is
not operated correctly.
To Next Page
Loading...
