ņ29
Procedure 1 Acquire a target whose position if fixed with respect to the ground.
2 Set the cursor mode to OFF.
3 Place the cursor over the tracked target and press the [CLR/INFO] key.
4 Target information menu is displayed.
5 Press the [4] key.
ON : Set this target as a reference target.
OFF : Stop using this target as a reference target.
When ON is selected, the speed device activates the reference target function.
Then symbol “ۑ
R
” is displayed when the reference target is set.
Only one target can be set as a reference target.
When a new reference target is created, the previous reference target is deleted.
When OFF is selected, the speed device deactivates the reference target function and other
functions become available.
To Next Page
Loading...
