3-56
3.6 Display User Map
y
y y
3
Plotting a mark / line make with latitude and longitude
Procedures 1 Open the Edit User Map menu by performing the following menu
operation.
Plot
→ 2. Mark Operations
→ 2. Edit User Map
2 Press the [2] key.
The Make with L/L menu will appear.
3 Press the [9] key to select the New Mark Input or New Line Input.
The Mark Input menu and the Line Input menu are switched.
4 Press the [1] key to select the type of mark font or line pattern to be
created.
The desired mark font or line pattern is selected.
To add a line, select midpoint --O-- .
5 Press the [2] key to select the color of mark or line to be created.
The desired mark or line color is selected.
6 Press the [3] key to input the latitude / longitude.
For the input method on the latitude / longitude input screen, see Section 3.3.4.
7 Press the [4] key to input the comment.
For the input method on the character input screen, see Section 3.3.4.
The window will not be open when the system is in the transmission state.
8 Press the [5] key.
Mark / Line plotting will be terminated.
To create another mark or line, repeat procedures 4 to 8.
To Next Page
Loading...
Need help?
General
