5-41
5.3.9 Setting Conditions for AIS Alarm (AIS Alarm Setting)
Conditions for issuing a Lost alarm and CPA/TCPA alarm for AIS targets can be set.
Setting of Condition for Lost Alarm
Procedures 1 Press the [RADAR MENU] key twice.
2 Open the AIS Alarm Setting menu by performing the following menu
operation.
7. AIS Menu
→ 6. AIS Alarm Setting
3 Press the [1] key.
The setting items for Lost Alarm will be displayed.
4 Press the [numeric] key corresponding to the condition to be set.
Off : A lost alarm is not issued.
Danger : A lost alarm is issued only for AIS targets for
which a dangerous target alarm has been issued.
ACT&Danger : A lost alarm is issued only for activated AIS
targets and AIS targets for which a dangerous
target alarm has been issued.
ACT&Danger&Select : A lost alarm is issued only for activated AIS
targets, data indicated AIS targets and AIS targets
for which a dangerous target alarm has been issued.
Note:
A lost alarm is not issued for sleeping AIS targets.
Setting of Condition for CPA/TCPA Alarm
Procedures 1 Press the [RADAR MENU] key twice.
2 Open the AIS Alarm Setting menu by performing the following menu
operation.
7. AIS Menu
→ 6. AIS Alarm Setting
3 Press the [2] key.
The setting items for CPA/TCPA Alarm is switched.
Off : A CPA/TCPA alarm is not issued.
ACT : A CPA/TCPA alarm is issued only for activated AIS targets.
ACT&Sleep : A CPA/TCPA alarm is issued for all AIS targets on the radar
display.
Note:
When the Lost Alarm menu set to Off, the CPA ring color changes to dark color.
To Next Page
Loading...
