JRC JMA-5912-6 - Page 372

8-17
Loosen the four
hexagonal bolts.
Bow direction
Turn off the safety
switch.
Bow
direction
Loosen the
four screws.
Magnetron cove
r
Magnetron Replacement Procedure for Scanner Unit NKE-2254
(1) Before beginning work, turn off the safety switch
located on the bottom of the stern side of the
scanner unit.
(2) Loosen the hexagonal bolts and remove the cover on the
right (starboard) side.
(3) Loosen the screws (four M4 screws) to remove the
magnetron cover.