JRC JMR-7210-6X - Setting Track Color; Turning On;Off Other Ships Track Function; Setting Other Ships Track Colors; Turning On;Off Other Ships Track Display

Section 6 Target Tracking and AIS 6-62
6.8.2.1 Setting track color
For the details on how to set the track color of tracked target, refer to "6.5.6.2 Setting track color of
tracked target"
For the details on how to set the track color of AIS target, refer to "6.6.6.1 Setting track color of AIS
target"
6.8.2.2 Turning on/off other ship's track function
For the details, refer to "18.11 Setting the Target Track Function to ON/OFF ".
Note
Note that when this function is turned off, all the other ship's track functions are turned off. In this
case, the track data of other ships is not saved, so they cannot be traced later.
6.8.2.3 Setting other ship's track colors
You can set either one track color for all targets under tracking, or individual colors for the ships of track
numbers from 1st to 10th. The same color is used to display the 11th to 20th ships.
For the details, refer to "16.2.8 Setting up the Display of Other Ship's Track".
Note
If the other ship's track function (Target Track Function) is turned off, the track data of other ships
is not saved.
6.8.2.4 Turning on/off other ship's track display
The target track display function can be turned on/off. Choices for track display are displaying/hiding
the tracks of all ships and Individual (displaying the tracks of individual ships).
For the details, refer to "16.2.8 Setting up the Display of Other Ship's Track".
Note
Even when Target Track Display is turned off, the track data of other ships is saved if Track display
Interval is set.