Section 12 Automatic Sailing (Option) 12-10
12.3 Selecting a Waypoint at which
Automatic Sailing Starts
Select a WPT (waypoint) at which automatic sailing starts.
1 Click on Procedure tab 2.
When selecting Procedure tab 1, click on the [Next] button.
When the [Back] button is clicked on, control returns to the route selection screen, enabling
re-selection of a route.
2 Click on the waypoint at which automatic sailing starts from the [TO-WPT] combo box.
Note
When the [Auto Sail] dialog box is activated during route monitoring, WPT that has been
passed through cannot be selected.
To Next Page
Loading...
