JRC JMR-7210-6X - Displaying the Chart by Entering the Position

8-11 Section 8 Functions of the ECDIS (Option)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
8.3.5 Displaying the chart by entering the position
By entering a position, the chart of a desired position can be displayed.
1 Click on the [Menu] button on the left toolbar.
The menu is displayed.
2 Click on [Chart] - [Off Center by Entering Position] on the menu.
The [Off Center by Entering Position] dialog box appears.
The latitude and longitude of the center of the current screen is displayed in the latitude and
longitude input boxes.
3 Click the latitude and longitude input boxes.
4 Enter the latitude and longitude of the chart you want to display with the software
keyboard.
Memo
The maximum latitude input range is 85 ° 00.000 (polar range restriction).
5 Click on the [Jump to the Following Position] button.
The chart is displayed having the entered latitude and longitude at the center of the chart.
[Jump to the following position]
button
Latitude and longitude input
boxes