JRC JMR-7210-6X - Searching the Position that Is Clicked on with the Cursor; Searching a Chart with the Chart Name; Displaying the Chart Screen that Is Selected from the List

Section 14 Creating a User Chart/ Updating a Chart Manually 14-28
14.3.2.1 Searching the position that is clicked on with the cursor
1
Move the cursor to the position where manual update is to be performed and click the
button.
ARCS:
All the charts that are overlaid on the position that was clicked on are displayed in the chart list.
C-MAP:
The chart that is drawn at the position that is selected by clicking is displayed in the chart list.
Memo
To clear the search result, click on the [Reset picked chart] (chart selection reset) button on the
[Select Chart] dialog box.
14.3.2.2 Searching a chart with the chart name
1
Enter a chart name in the search box on the [Select Chart] dialog box.
The applicable chart is displayed.
Memo
To clear the search result, clear the input in the search box.
14.3.2.3 Displaying the chart screen that is selected from the list
When the target of manual update is an ARCS chart, the chart file to be updated can be displayed on
the screen for verification before starting the update.
When the [Preview] check box is checked, the chart that is selected in the list is displayed at the center
of the screen.
When the check box is unchecked, the display is cleared.