JRC JMR-7210-6X - Setting the Azimuth Mode

5-23 Section 5 Basic Operation of the Radar
1
2
3
4
5
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
Setting items Effects and recommended use conditions
[Process Off] Sets the image processing function to Off.
[3 Scan CORREL] Use when the rain/snow clutter images are heavy.
[4 Scan CORREL] Use when enhancing the target while suppressing sea clutter images.
[5 Scan CORREL] Use when detecting small targets in sea clutter images.
[Remain] Use when own ship is rolling severely.
[Peak Hold] Use for detection of small targets of low detection probability.
5.4.5 Setting the azimuth mode
Set the bearing for the radar video to be displayed on the radar display.
1 Click on the Azimuth mode combo box in Presentation and mode information.
2 Select the Azimuth mode.
Note
Available combinations vary depending on the settings of the azimuth mode and the
motion mode (refer to "5.4.6 Setting a motion mode".).
Azimuth mode
Motion mode
N UP H UP C UP W UP C UP
(Angle Setting)
TM     
RM(T) or RM(R)     
Azimuth Mode combo
box