13-9 Section 13 Operating a Chart (option)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
4 Click on the [Accept] button to accept the updated chart.
The updated chart is integrated into the original chart.
For the details of the highlight indication, refer to 13.14 Displaying differences at chart update.
5 To reset the updated chart to the pre-update state, select two or more target charts
from the list and click on the [Reject] button.
When the [Reject] button is clicked on, the automatic update of the chart is rejected and the
chart is reset to the pre-update state.
After the Reject operation, a rejection marker is displayed on the target object.
For the details of the rejection indication, refer to 13.14 Displaying differences at chart update.
Click on the [Accept] button:
The object is accepted and only
the updated object is displayed.
Click on the [Show] button:
A highlight marker is displayed
on the object to be updated.
To Next Page
Loading...
