Section 16 Setting up Screen View 16-12
The descriptions of settings are shown in the table below.
Setting Item Description of Setting Setting Value
Past Track Selecting this enables to display the past
track.
To enable: Select.
To disable: Clear.
Plot Color (plot
color of track)
When Past Track is enabled, select a
plot color of the track from the list
(preview not supported).
White (Black), Gray, Pink, Magenta,
Blue, Cyan, Green, Yellow, Orange,
Dark Red
Note
When the background of the screen
is being set to Day1 or Day2, Black
can be selected instead of White.
Track Period When Past Track is enabled, select a
track period from the list (preview not
supported).
1, 2, 4, 6, 8, 12, 16, 24 h
Time Label Selecting this enables to display the time
label interval.
To enable: Select.
To disable: Clear.
Interval (time label
interval)
When Time Label is enabled, select a
time label interval from the list (preview
not supported).
1, 3, 5, 10, 30, 60,120 min
Past Position Selecting this enables to display the past
position.
To enable: Select.
To disable: Clear.
Interval
(past position
interval)
When Past Position is enabled, select an
interval of track points from the list
(preview not supported).
0.5 min, 1 min, 2 min, 4 min, 0.1
NM, 0.2 NM, 0.5 NM, 1 NM
Current Vector
Enable the current track display by
checking the item when Past Track is
enabled.
Enable: Check.
Disable: Uncheck.
Current Size
Set a vector length when Current Vector
is enabled.
0.1 ~ 99.9kn/cm
Interval
When Current Vector is enabled, select
the display interval.
3sec, 5sec, 10sec, 30sec, 1min,
3min, 5min, 10min, 30min, 60min,
0.1NM, 0.2NM, 0.3NM, 0.5NM,
1NM, 3NM, 5NM, 10NM
Layer A/B/C/D/E
When Current Vector is enabled, enable
the display of each of the layers, A, B, C,
D, and E by checking the item.
Enable: Check.
Disable: Uncheck.
Color selection
combo box
When Layer A/B/C/D/E/F is enabled,
select the display color of each item.
White, (Black), Gray, Amber,
Magenta, Blue, Cyan, Green,
Yellow, Orange, Dark Red
To Next Page
Loading...
