JRC JMR-7210-6X - Page 549

16-27 Section 16 Setting up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
The descriptions of settings are shown in the table below.
Setting Item Description of Setting Setting Value
For All Target Track Click on the check box and select a
plot color of target tracks from the
list.
White (Black), Gray, Amber,
Magenta, Blue, Cyan, Green,
Yellow, Orange and Dark Red
For Individual Target Track Click on the check box and select
plot colors of individual target
tracks (Tracks 1 to 10 and Tracks
11 to 20) from the list.
White (Black), Gray, Amber,
Magenta, Blue, Cyan, Green,
Yellow, Orange and Dark Red
Plot Interval Select a plot interval of target
tracks from the combo box.
Off, 3s, 5s, 10s, 30s, 1 min, 3
min, 5 min,
10 min, 30 min, 60 min, 1 NM,
3 NM, 5 NM, 10 NM, 0.1 NM,
0.2 NM, 0.3 NM, 0.5 NM
* White/Black interchanges under the following conditions.
RADAR screen: Always White
ECDIS screen: Black at Day1/Day2 (or Day), white at Day3/Dusk/Night
Shortcut
Click on any of available shortcuts to display the related dialog box.
Shortcut Setup Dialog Box
File Load/Save [File Load/Save] dialog box in File Manager