JRC JMR-7210-6X - Page 593

17-9 Section 17 Setting up Alerts
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
Automatic compensation of entered values
The threshold values must satisfy the following conditions.
• Shallow Contour ≤ Safety Contour ≤ Deep Contour
• Shallow Contour ≤ Safety Depth ≤ Deep Contour
Safety Contour and Safety Depth are not related.
If there is any contradiction in the entered values, the following automatic compensations will be
performed.
Condition Compensation
Safety contour value (or Safety Depth value) <
Shallow contour value
Replace the Shallow contour value with the Safety
contour value (or Safety Depth value)
Deep contour value < Safety contour value (or
Safety Depth value)
Replace the Deep contour value with the Safety
contour value (or Safety Depth value)