JRC JMR-7210-6X - 18.13 Setting Automatic Sailing Parameter Values

Section 18 Setting up the Operation Mode 18-26
18.13 Setting Automatic Sailing Parameter
Values
Select [Autosail] in the classification pane.
Set various parameter values relating to automatic sailing in the setting dialog of the edit pane.
Note
• Displayed when the automatic sailing option is attached.
• When PT900 is installed as auto pilot, [Autosail] is not displayed.
Example of screen display under the following
conditions:
• Tokyo Keiki TCS Category C
• Tokyo Keiki TCS Category B (new system)
Example of screen display under the following
conditions:
• Tokyo Keiki TCS Category B (old system)
• YDK TCS Category C