JRC JMR-7210-6X - Page 653

18-51 Section 18 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
Setting Item Description of Setting Setting Value
[Multi Dial] tab
Vector Time When this is selected, the vector length setup function
will be manipulated with the [MULTI] control.
This item is displayed on both the RADAR screen and
the ECDIS screen.
To enable: Select.
To disable: Clear.
Trails Length When this is selected, the radar trail length setup
function will be manipulated with the [MULTI] control.
This item is displayed on the RADAR screen.
To enable: Select.
To disable: Clear.
C UP Angle When this is selected, the course adjustment function
in the course-up mode will be manipulated with the
[MULTI] control.
This item is displayed on both the RADAR screen and
the ECDIS screen.
To enable: Select.
To disable: Clear.
Own Track Color When this is selected, the own ship track color switch
function will be manipulated with the [MULTI] control.
This item is displayed on both the RADAR screen and
the ECDIS screen.
To enable: Select.
To disable: Clear.
Manual Tune When this is selected, the manual tuning function will
be manipulated with the [MULTI] control.
This RADAR screen items are displayed.
This item is not displayed in the Slave (sub-display)
mode, however.
To enable: Select.
To disable: Clear.
Display
Brightness
When this is selected, the display brightness
adjustment function will be manipulated with the
[MULTI] control.
It cannot be changed since power is always on.
Always enabled.
Panel
Brightness
When this is selected, the operation unit brightness
adjustment function will be manipulated with the
[MULTI] control. This item is always displayed.
To enable: Select.
To disable: Clear.
Gain When this is selected, the gain adjustment function will
be manipulated with the [MULTI] control.
When the RADAR function can be used, the item will
be displayed.
To enable: Select.
To disable: Clear.
Sea When this is selected, the sea adjustment function will
be manipulated with the [MULTI] control.
When the RADAR function can be used, the item will
be displayed.
To enable: Select.
To disable: Clear.
Rain When this is selected, the rain adjustment function will
be manipulated with the [MULTI] control.
When the RADAR function can be used, the item will
be displayed.
To enable: Select.
To disable: Clear.