Switch/display Description
D
Number of stitches of
reverse feed stitching
(at end) C, D
Numbers of stitches of reverse feed stitching at the end of sewing C and D
are displayed. (0 to 99 stitches)
* These numbers of stitches are only displayed in the case the reverse feed
stitching is performed at the end of sewing.
Refer to
"4-2-5. Reverse feed stitching (at end) pattern" p. 37
.
E
Part number The part number (0 to 24 characters) is displayed.
F
Process/Comment Depending on the setting of memory switch U404, either the part number/
process or the comment is displayed. (0 to 24 characters)
Refer to
"4-5. List of memory switch data" p. 48
.
G
Pitch Depending on the setting of memory switch U401, either the "pitch (-5.00 -
5.00)", the "number of stitches per inch" or the "number of stitches in 3 cm"
is displayed.
* In the case the custom pitch is selected, the custom pitch pattern number
is displayed.
Refer to
"8-5. Custom pitch" p. 87
.
H
Limit on sewing
speed
The currently-set limit on the maximum sewing speed is displayed. (150 sti/
min - )
I
Correction value for
feed dog height
The correction value for the feed dog height with respect to the currently-
selected sewing pattern is displayed.
J
Number of stitches of
pattern
In the case the constant-dimension sewing pattern is selected, the total
number of stitches of the sewing pattern is displayed, and in the case the
polygonal-shape stitching pattern is selected, the number of stitches of the
current step is displayed. (1 to 2,000 stitches for both numbers of stitches)
* The number of stitches of pattern is displayed in the case the constant-
dimension sewing pattern or the polygonal-shape stitching pattern is
selected.
K
Current step of
polygonal-shape
stitching pattern
The current step is displayed. (1 - 20)
* The current step of polygonal-shape stitching pattern is displayed in the
case the polygonal-shape stitching pattern is selected.
L
Total number of steps
of polygonal-shape
stitching pattern
The total number of steps is displayed. (1 - 20)
* Total number of steps of polygonal-shape stitching pattern is displayed in
the case the polygonal-shape stitching pattern is selected.
M
Simple-lock status
pictograph
The status (enable/disable) of the simple lock is displayed.
Refer to
"8-7-1. Simple lock" p. 99
.
ā 29 ā
To Next Page
Loading...
