10
Name Function
Needle stop position
changeover icon
Stop position of the needle (upper or lower position) when stopping the
sewing machine can be changed over.
: The sewing machine stops with its needle down
: The sewing machine stops with its needle up
Pivot function icon
You can select the setting where the presser foot goes up with the needle
held in the needle-down stop position when you stop the sewing machine.
: Pivot function is OFF
: Pivot function is ON
Drop feed icon
Feed Dog can be disengaged or engaged.
: Feed Dog is engaged
: Feed Dog is disengaged
Change the page
icon
Push this icon to change the page.
Pattern changeover
icon
Use this icon when you want to change over the pattern under the combi-
nation stitching mode.
Single stitching tab
The sewing mode can be set to the single stitching mode by pressing the
single stitching tab.
Combination stitch-
ing tab
The sewing mode can be set to the combination stitching mode under
which two or more patterns are sewn in combination by pressing the com-
bination stitching tab.
Practical pattern
icon
Push it to change the screen to utility stitch patterns.
Decorative pattern
icon
Push it to change the screen to decorative stitch patterns.
Quilt pattern icon
Push it to change the screen to quilting stitch patterns.
Buttonhole pattern
icon
Push it to change the screen to buttonholing patterns.
Letter icon
Push it to change the screen to letters.
User memory icon
Use the user memory icon when you want to select the pattern stored in
the user memory.
No. selection icon
Push it to change the screen to the one to select the stitch pattern by
pattern No.
Pattern icon
It is possible to select stitch pattern.
To Next Page
Loading...
Need help?
General
