JUKI MO-6904S - Threading the machine

– 16 –
To thread the machine head, remove the cloth plate
in advance.
4-3.Threadingthemachine
Whenusinganuntwistedthreadsuchas
woolynylonthreadorweakthread,do
not wind it round the intermediate thread
guide.
★
 Howtoremovetheclothplate
Remove the cloth plate by holding the cloth plate
guide base.
Donottouchthecurvesensor(optional)
mounted on the cloth plate.
★
 Howtothreadtheneedlethreadsiliconoil
tank
When the needle cooler is used. Pass the thread
under the center pawl.
When the needle cooler is not used. Pass the thread
above the center pawl.