EasyManua.ls Logo

JUKI MO-6904S - Page 23

JUKI MO-6904S
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 20 –
Whensewinganout-curvepartofthema-
terial, support the material by hand since
seamseasilyslipoffthematerialedge.
Inthecaseofanout-curve
4) Once the material has come out of the sensor,
the machine stops after several stitches. The
stacker operates when the stacker selector
switch or stacker starting switch
is depressed.
CAUTION :
• Donotplacehandsunderthethread
trimmer presser in order to protect
againstinjurycausedbytrapping.
• Donotplaceyourfacenearthestacker
while it is in operation since air is blown
outfromthestackerbloweroutlet
.
• Donotplacehandsnearreceivingplate
ofthestackerunitwhilethestacker
is in operation.

Table of Contents

Other manuals for JUKI MO-6904S

Related product manuals