JUKI SC-922 Engineer's Manual

– 26 –
87 Function of Pedal curve is selected. (Improving pedal inching 0/1/2 U 39
pedal curve operation)
selection
90 Initial motion up Automatic UP stop function is set immediately after 0/1 U 39
stop function turning ON the power.
0 : off
1 : on
91 Function of Function of compensating stitching when turning 0/1 U
prohibiting handwheel by hand at the time of completion of
compensation constant-dimension stitching
operation after 0 : Function of compensating stitching is effective.
turning 1 : Function of compensating stitching is prohibited.
handwheel by
hand
92 Function of Function to reduce speed at the time of completion 0/1 U 39
reducing speed of reverse feed stitching at the start of sewing.
stitching at the 0 : Speed is not reduced.
start of sewing 1 : Speed is reduced.
93 Function added Operation of needle up/down compensating switch is 0 to 3 U 40
to needle up/ changed after turning ON the power of thread trimming.
down compen- 0 : Normal (needle up/down compensating stitching
sating switch only)
1 : One stitch compensating stitching is performed
only when aforementioned changeover is made.
(Upper stop → upper stop)
2 : Needle-down function activated after thread
trimming
3 : Besides the operation 2, addition of needle-up
function activated by lowering the presser bar
and needle-up function activated by trimming
the thread
94 Continuous + The function that does not stop the sewing machine 0/1 U 40
One-shot by combining continuous stitching with one-shot
nonstop function stitching using the program sewing function which is
available in the IP operation panel.
0 : Normal (The sewing machine stops when a
step is completed.)
1 : The sewing machine does not stop when a
step is completed and proceeds to next step.
95 Function of The machine head to be used is selected. U
machine head * When the machine head is changed. each setting
selection item is modified into initial values for the machine
head.
96 Max. number of Max number of rotation of the sewing machine head 150 to MAX U 40
rotation setting can be set. (sti/min)
(The MAX value differs by machine head.)
102 Function of Sew patterns such as the backstitch and set a function. 0/1 S
pattern stitching 0 : The operation of the pattern selection is effective.
1 : The operation of the pattern selection is invalid.
103 Needle cooler Delay time from the stop of sewing machine to the 100 to 2000 U
output OFF output OFF is specified using the needle cooler (ms)
delay time output function.
104 Input / output Display function of input/output data is set. 0/1 S
Test display 0 : Normal movement
1 : Display the state of the input/output after the
next power supply injection.
Number of rotations
2
0
Pedal stroke
1
No. Item Description Setting range Setting level
(Start level ; U : User’s mode, S : Service mode)
7
8
0
0
9
0
1
9
1
2
9
0
3
9
0
4
9
0
5
9
1
5
U
L
6
9
0
0
0
3
Indication of
function setting
Ref.
page
∗ Do not change the set values with asterisk (∗) mark as they are functions for maintenance. If the standard set value set at the time
of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
2
0
1
0
3
0
1
0
0
5
4
0
1
0

JUKI SC-922 Specifications

General

Brand	JUKI
Model	SC-922
Category	Sewing Machine
Language	English