JUMO 703041 - 2 Identifying the Instrument Version; Type Designation

9
2 Identifying the instrument version
2.1 Type designation
Basic type extensions
1 Basic type 1
Version
8 standard, with factory settings
9 programming to customer specification
logic outputs (2 are available as standard)
10/12V
20/18V
X = available in this option slot, - = not available in this option slot
Type 703042/43/44
Type 703041 (no option 3)
1. 2. 3. Option slot Max. number Max. number Option 1 Option 2
0 0 0 not used XX
1 1 1 analog input 2 (universal) 1 1 X X
2 2 2 relay (changeover) 2 1 X -
3 3 3 2 relays (make contact) 2 1 X -
4 4 4 analog output 2 2 X X
5 5 5 2 binary inputs 2 1 X X
6 6 6 solid-state relay 1A 2 2 X X
7 7 7 RS422/485 interface 1 1 X X
8 8 8 Profibus-DP interface 1 1 X X
Supply
2 3 110 — 240V AC -15/+10%, 48 — 63Hz
2 5 20 — 30V AC/DC, 48 — 63Hz
/1 – – / ,
703041 / 1 8 1 – 1 4 0 – 2 3 / 0 0 0 ,
Basic type
703041 JUMO dTRON 316, format 48mm x 48mm
incl. 1 analog input, 2 relay outputs and 2 binary inputs or 2 logic outputs
703042 JUMO dTRON 308, format 48mm x 96mm (portrait format)
incl. 1 analog and 2 binary inputs, 2 relays and 2 logic outputs
703043 JUMO dTRON 308, format 96mm x 48mm (landscape format)
incl. 1 analog and 2 binary inputs, 2 relays and 2 logic outputs
703044 JUMO dTRON 304, format 96mm x 96mm
incl. 1 analog and 2 binary inputs, 2 relays and 2 logic outputs
Extra codes
000none
214math and logic module
217ratio controller (requirement: 2 analog inputs)
218difference controller (requirement: 2 analog inputs)
2 1 9 humidity controller (requirement: 2 analog inputs)
Approvals
000none
056DIN EN 14597
dTRON 304 with GL approval on request