JVC CL-S500 Series Installation Manual

- 13 -
－
USB POWER
***
－
Auto * .......................................................... ON only when USB UP is connected
－
O ............................................................... OFF
－
READING LIGHT
－
Low .............................................................. Low illuminance
－
Middle ....................................................... Medium illuminance
－
High ............................................................High illuminance
－
Auto
*
.......................................................... Automatic adjustment
－
FACTORY PRESET
－
Yes ............................................................... Executes FACTORY PRESET
－
No ................................................................ Cancels FACTORY PRESET
• KEY LOCK_1 (The stand-by button can be locked by long press on it.)
• KEY LOCK_2 (The other buttons but the stand-by button can be locked by long
press on the “▼” and “▲” button.)
Note
Items with * mark indicate factory default setting.
**: FUNCTION buttons (F1 or F2) can settings for these following function.
• CONFIGURATION
• INPUT SOURCE
• DYNAMIC GAMMA
• AUTO TEXT MODE
• TEST PATTERN
• READING LIGHT
***: USB POWER selection and USB power output
USB
POWER
With USB UP connection No USB UP connection
Power of
monitor
ON
Power of
monitor
OFF
Power
Save
Power of
monitor
ON
Power of
monitor
OFF
Power
Save
AUTO Yes Yes Yes No No No
OFF Yes No No No No No

JVC CL-S500 Series Specifications

General

Brand	JVC
Model	CL-S500 Series
Category	Monitor
Language	English