- 30 -
Reading light
This product is equipped with reading light for hand lighting. You can reduce the
burden on your eyes in a dim room by illuminating documents or your keyboard in the
environment (20 Lux or less), such as a reading room, where mammography diagnosis
is performed.
The default of this function is “OFF”. You can change the setting by using the OSD.
Setting method
●
Turn a light on or o
You can turn it on and o by pressing the D operation button while the operation guide
is not displayed on the OSD.
●
Illuminance Adjustment
Illuminance can be adjusted by using the OSD.
1) Press any one of operation buttons (A–C), and “Operation Button Guide
①
” will
appear on the screen.
2) Press the “MENU” button.
3) Select “READING LIGHT” from MENU 2/2 using the “▼” or “▲” button, and press the
“OK” button.
4) Select your preference from “Low”, “Middle”, “High” or “Auto” from the OSD for
“READING LIGHT”, and then press the “OK” button.
・
Low (Low illuminance)
・
Middle (Medium illuminance)
・
High (High illuminance)
・
Auto (Automatic adjustment : It automatically adjusts illuminance in accordance
with the brightness in a room by the illuminance sensor equipped with a
monitor.)
* If the illuminance is unstable due to the brightness of a surrounding environment,
select “Low”, “Middle”, or “High”.
INFORMAT ION 2/2
T-PATT E R N :AAPM TG18-OI Q
DP : En a b l e
USB PO
W
: Au to
R. LIGHT: Hi gh
FUNC -1 : T E S T P A T T E RN
FUNC -2 : DYNAMIC GAMMA
INFORMATION 2/2
Reading light
To Next Page
Loading...
