KAESER ASD T Series User Manual

2 Technical Data
2.1 Nameplate
The model designation and important technical information are given on the machine's nameplate.
The nameplate is located on the outside of the machine:
■ above the cooler
or
■ on the rear of the machine.
➤ Enter data from the nameplate here as reference:
Characteristic Value
Model
Part no.
Year
Serial no.
psig
cfm
Voltage
Hz/RPM
Package FLA
Phase
HP
Wiring Diagram
FOR SERVICE, REFER TO EQUIPMENT NUMBER
Tab. 2 Nameplate
2.2 Options
The table contains a list of possible options.
➤ Enter options here as a reference
Option Option code Exists?
MODULATING control C1
Filter monitoring option package C2
Machine mountings H1
Cooling air filter mat K3
Transformer power supply T2
Prepared for heat recovery W1
Heat recovery ΔT=25 K W2
2 Technical Data
2.1 Nameplate
9_5721 06 USE
Service Manual Screw Compressor
ASD T Tri-Voltage
3

KAESER ASD T Series Specifications

General

Model	ASD T Series
Category	Compressor
Frequency	50/60 Hz
Drive System	Direct Drive
Cooling	Air-cooled
Type	Rotary Screw Compressor
Cooling System	Air-cooled
Control System	Sigma Control 2
Pressure	Up to 15 bar
Integrated Dryer	Yes
Voltage	400 V
Weight	Varies by model
Drive Motor	IE3 Premium Efficiency